ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 Safety Instructions READ INSTRUCTIONS - Read all safety and operating instructions SERVICING - Do not attempt to service this product yourself.
Subwoofer from their respective packaging. Please make sure to retain all packaging materials for future shipping requirements. The SAT 5 and SUB 8 leave the Blue Sky factory fully calibrated. With the gain controls set to the reference mark (which is at 12 o’clock on the gain control) on the subwoofer and monitor...
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 Congratulations! You have now completed the set up of one of System Signal the world’s finest monitoring systems.
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 A Tour of SAT 5 ��� � ������ ������� �������� ����� ������� ������������ �� ��� ���� ������ ���...
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 A Tour of SUB 8 ��� � � ������ ��������� ��� ���� ��� ������ ������� ���� ���� ���� ������ ��� ����...
Page 9
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 RIGHT/LEFT IN - These XLR inputs should be connected to the 1⁄4 X 20 INSERTS - Located on the bottom of the subwoofer right/left output of your console or digital workstation.
This setup guide should be used for 2 Channel systems with one or more subwoofers. If you need information regarding setting up a 5.1 channel system, please consult the manual that comes with the Blue Sky Bass Management Controller.
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 Cable and Wiring Specifications Use high-quality, shielded cables to connect your console, workstation or other source to your Blue Sky monitoring system. Foil-shielded cables, such as Belden 8451, 8761, or 9501 should do quite well.
100 Watts RMS into 4-Ohm 01% THD + noise at rated power @ 100 Hz In order to continually improve all of its products Blue Sky reserves the right to XLR balanced input change these specifications without notice.
ProDesk™ 2.1 System (future subwoofer models may also take advantage of this feature). For 5.1 channel systems the FVC should not be used and instead the Blue Sky BMC should be used. (For more information on the Blue Sky BMC, please visit www.abluesky.com)
14. General Contact Instructions Details Service for the U.S. versions of Blue Sky products is available only from our For sales and other enquiries, please contact Blue Sky at: authorized distributor, Group One Ltd., located in Farmingdale, New York. (Service for Blue Sky products outside the United States can be obtained Blue Sky International through local dealers or distributors.) If your monitor needs service, follow...
Page 17
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 4 Page 17...
Page 18
Blue Sky International 70 Sea Lane Farmingdale, NY 11735, USA www.abluesky.com tel: 516 249 3662 fax: 516 249 8870 email: info@abluesky.com...
Need help?
Do you have a question about the PRODESK SUB 8 ACTIVE SUBWOOFER and is the answer not in the manual?
Questions and answers