Troubleshooting - H&B PL-4250V Owner's Manual

Troubleshooting

Before you call a service technician, please scan this list of problems and possible solutions. It
may save you time and money.
Problem
No picture & No sound
Picture OK & No sound
The remote control doesn't work
Digital broadcasting screen
problem
No or Poor color or Poor picture
The image is too light or too dark
The image is too large or too small
No output from one of the speakers
Strange sound form the Monitor
Quick Action for Possible Solution
Check whether the Monitor is turned on.
Power cord inserted into wall outlet?
Plug another product's power cord into the wall outlet where the
Monitor's power cord was plugged in.
Press the VOLUME( ) key.
Check the audio input signal.
Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
Check to see if the batteries are installed with the correct
polarities.
Check the digital signal strength and input antenna.
Select Color in the Picture and press
Keep a certain distance between the Monitor and the VCR.
Activate any function to restore the brightness of the picture.
Check to see that both the monitor and the source are plugged
in and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
Adjust Balance in the Sound Menu.
Typical sound due to normal Monitor operation, Monitor is not
faulty.
59
key.
OWNER'S MANUAL