Basic Operation - H&B PL-4250V Owner's Manual

Basic Operation

Turning the Monitor On And Off
Press the Power key on the remote control. The TV will turn on and you will be ready to use its features.
You can also use the Power key on the front panel.
Select Source
Press INPUT key on the remote control. Then you can see the source list menu shown as below.
Source list menu
TV program Selection
Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control
and select TV on the source list.
Use PG+, PG- key or numeric key to change TV programme you want.
Press Pre PG key on the remote control to watch the previous programme.
Also, you can tune the cable service, provided programmes while using the cable box. For
further information regarding cable TV service, contact your TV service provider(s).
Volume Control
Use VOL+ / VOL- key on the remote control to adjust the volume level.
Press MUTE key on the remote control when you need to cut the sound temporarily.
Select the source to watch with
control and press the Menu / Set button.
27
/ key on the remote
OWNER'S MANUAL