Connection/Preparation; Mounting The Table Base; Setting Up And Connecting The Loudspeakers - Grundig APOLLO 42 PW 110-7510 TOP User Manual

SPEAKER OUT
L R
AV IN AV OUT

CONNECTION/PREPARATION

Mounting the table base

Diagrams are contained in the assembly instructions enclosed with the
table base.
1 Fasten the two brackets to the table base using the hex socket
screws supplied.
Remove four fixing screws for each bracket from the back of the
2
device.
3 Place the stand on a level surface.
4 Put the device on top of the stand.
Fasten the stand to the device by screwing four screws to the
5
back of the device for each bracket.

Setting up and connecting the loudspeakers

Fasten the brackets to the speakers using the screws supplied.
1
Screw the speakers to the brackets on the device using the screws
2
supplied.
Put the covers on the two speakers.
3
Use the speaker cable supplied to connect the
4
+« terminals on the device to the
OUT –
nals on each speaker.
Connect the cables marked in red to the red terminal.
S-VHS
IN PU
T
__________
IN PU
T
»SPEAKER
»INPUT – +« termi-
5