Bluetooth Setup; Airplay Setup - Polk Audio Woodbourne Owner's Manual

woodbourne setup options
The Woodbourne includes both AirPlay and
Bluetooth wireless technologies that allow you
to stream music from any compatible device.

Bluetooth setup

connecting devices
To pair and connect your music
player with the Woodbourne:
1. M ake sure your music player
and Woodbourne are both powered on.
2. M ake sure your music player has Bluetooth
turned on. See your manual for instructions.
3. P ress the Bluetooth source button ( ) from
the Woodbourne remote or press the
source ( ) button on the Woodbourne
until the Bluetooth source is selected
(the Bluetooth symbol will pulse).
4. Your Woodbourne will become listed on your
music player and will be available to pair &
connect. Select "polk woodbourne" on your
player to initiate the connection process.
note: Some Android devices require a separate
step after pairing has been completed.
4 woodbourne: wireless speaker system
5. A fter a short delay (5 seconds), the two
devices should now be connected. The
Bluetooth source symbol will be a solid blue;
indicating a connection has been made.
6. P lay your music from your device!
disconnecting devices
If your Woodbourne is in Bluetooth source and you
press and hold the source button ( ) for 3 seconds,
then any Bluetooth device that's connected will be
disconnected automatically. The Bluetooth LED
should flash 4 times within one second to indicate the
Bluetooth device was disconnected. The Woodbourne
will then become available for pairing and connecting.
AirPlay. Getting Started.
AirPlay technology allows you to stream music
from your PC (iTunes 10.2 or later) or iOS device
(iOS 4.3 or later) to your Woodbourne speaker
using your home or office network. To take
advantage of this feature you need to first get
your Woodbourne speaker connected to your
network. This can be done by directly connecting
your Woodbourne to your router with an Ethernet
cable or by utilizing the built-in wireless module
in the Woodbourne (see instructions on p5).
Once your Woodbourne speaker is connected
to the network you will see the AirPlay icon
near your music player controls:
When you click or tap on this icon you will see a list of
all available AirPlay speakers that you can use. Click
or tap on the one you want and your music will be
sent to that speaker. If you would like, you can change
the name of your Woodbourne as it appears in the list
(see instructions on p5).

AirPlay setup

With AirPlay you have several options from which
to choose for setting up your Woodbourne:
What do you want to do? Then use this:
If you want to use AirPlay Wi-Fi login sharing
from your iOS device and page 5
don't want to change the
name of your Woodbourne
or perform a firmware update.
If you want to use AirPlay from Polk's mobile app
your iOS device and you want page 6
to change the name, and/or
update firmware.
If you want to use AirPlay Web pages
from only your Mac/PC page 7
AirPlay setup using Wi-Fi login sharing
1. C onnect your iOS device to the Woodbourne's
USB input using the standard sync cable that
came with your device.
2. M ake sure that your device is already
connected to the same wireless network
that you want your speaker to connect to.
3. W ith your speaker powered on, and in USB
source, press and hold the source button ( )
for approximately 3 seconds.
4. When you receive a pop-up alert on your
iOS device, you can release the button.
5. T ap on the ALLOW button on the iOS
device to share the Wi-Fi credentials
with the Woodbourne speaker.
6. T he speaker will now connect to the
wireless network. The Wi-Fi logo ( ) on
the Woodbourne should flash and then turn
solid for two seconds before fading away.
more information @ www.polkaudio.com 5