Page 1
56K USB Pro Modem Quick Setup Guide 56USBPRO...
Page 2
Internet connection. Some fees may be payable – please check the ISP’s CD for more information. Once on the Internet you can visit Dynalink Modems’ web site at www.dynalink.com.au (Australia) or www.dynalink.co.nz (New Zealand) to access further helpful information.
The modem consumes more power than a bus-powered port can normally supply. Self-powered USB Hubs, which overcome this issue, are available from Dynalink. Install the modem drivers System will report that it has detected a new device Atlas Modem Board.
Page 4
56K USB PRO Modem Quick Set-up Guide Windows ME: Click Next. Select Specify the location of the driver – Next. Click Specify a location. Browse to the folder C:\DynalinkUSB\winme, or the folder you have chosen in Step 1 (3). Click Next-Finish. Windows will continue to detect another device.
Once you are connected to the Internet, you will find further information on Dynalink Modem’s World Wide Web site at www.dynalink.com.au/support (Australia) or www.dynalink.co.nz/support (NZ). Here you can learn how to setup the Bitware software for fax, extensive troubleshooting information, downloads and much more information.
Page 6
PC. Verify your PC is USB ready. A program which can do this for you is available for download from our website (www.dynalink.co.nz). Verify your PC’s BIOS has USB IRQ enabled. This is an advanced procedure, so please contact your computer dealer or check your PC’s manual for instructions.
Page 7
Return delivery after repair will be paid for by Dynalink. We reserve the right not to repair or replace goods that: have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.
Need help?
Do you have a question about the 56USBPRO and is the answer not in the manual?
Questions and answers