Decoder Connection; Headphone Connection; Adjusting Headphone Volume; External Speaker - Grundig P 37-830 Multi/ICN User Manual

Connecting decoder to »AV 1« socket
Some stations – whose channels are transmitted
via cable unit or satellite receiver – code their trans-
missions. Picture and audio are thus indistinguis-
hable. You can decode such channels with a deco-
der.
Connection
Connect the »EURO-AV 1« socket of the TV to the
1
socket of the decoder with a EURO/AV (scart) cable.
Setting for operation with decoder
1 Select the channel with the scrambled programme.
The TV set switches automatically to channel posi-
tion »AV 1«.
Call up »DIALOG CENTER« with the buttons h and
2
G.
3 Select and call up the »SPECIAL FUNCTIONS« line.
4 Select the »Decoder P ..« line. In this line the
channel position which was previously selected is
displayed.
Using F or E, select »on« (if no decoder is
5
connected, select »off«).
This setting can also be activated for all channel
positions (P1 – 99) from the page »SERVICE«.
6 Exit the page with
Operation
1 Select channel position for the scrambled programme.
16
AV1
¢
.
T XT
Headphones
Connection
1 Insert the headphone jack (3.5 mm ø jack) in the
headphone socket
– This switches off the speaker on the set.
Adjusting the headphone volume
Adjust volume using F or E .
1

External speaker

Connection
1 Connect speaker (nominal impedance min. 8 Ohm)
to the speaker socket at the rear of the set.
Adjust volume using F or E .
2
P
at the front of the set.
AV1