Connecting External Devices; Audio/Video Connection; Camcorder Connection; Vcr, Satellite Receiver Or Set Top Box Connection - Grundig P 37-830 Multi/ICN User Manual

Using an AV-Euroconnector to connect a
video recorder, satellite receiver, SET
TOP box or camcorder
AV1
AUDIO
EURO-AV
Connect the »EURO-AV« socket of the TV to the
1
desired video recorder, satellite receiver, SET TOP
box or camcorder with a EURO/AV (scart) cable.
To connect a camcorder, use the appropriate adap-
ter cable.
Operation
0 and »AV 1« will be shown.
1 Press
AV
Start playback on the video recorder or camcorder
or switch on the satellite receiver.
– The recorder playback or the satellite receiver
channel will appear on the screen.
Setting video standard (VHS or SVHS)
This setting depends on the connected video
recorder.
Call up »DIALOG CENTER« with the buttons h and
1
G.
2 Select the line »SPECIAL FUNCTIONS« line.
Select and call up the »Video« line and use F or
3
E to select »VHS« or »SVHS«.
Playback
Switch on video recorder or SET TOP box and
1
choose the desired function.
You will let you see and hear the picture and sound
information from the external device on the TV set.
Video playback via the aerial socket
The video recorder can also be connected to the
aerial socket of the set. The aerial must then be
connected to the aerial socket on the video recor-
der.
In order to view playback from the video recorder, a
channel position must be assigned. See settings in
chapter on setting channels manually on page 6
under »Direct channel input« (see the operating
instructions of the video recorder also).
The video channel position must be one of the two
last positions before the point of reversal (see
page 6 "Limiting channel position selection").
15