Page 1
WIRELESS AUDIO VIDEO TRANSMITTER WT – AV 1 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS...
Page 2
___________________________________________________________________ 3 Die Funktion 9 Betrieb DEUTSCH 4 Sicherheit 10 Informationen 4 Lieferumfang 11 Technische Daten 5 Auf einen Blick 51 Service 7 Anschließen 13 Function 19 Operation ENGLISH 14 Safety 20 Information 14 Packing contents 21 Technical data 15 Overview 51 Service 17 Connection 23 Fonctionnement...
Page 3
LCD television The WT-AV 1 system With the WT-AV 1 radio transmission system picture and sound signals, as well as infra-red signals from the remote control, are transmitted over a distance of up to 300 m outdoors and up to 30 m indoors. This range is restricted indoors, depending on the construction materials used in the buil- dings.
OVERVIEW ___________________________________________ The WT-AV 1 Transmitter R • AUDIO • L IN VIDEO IN DC 9V DIP ON Antenna, receives the signals (from the remote control) which are transmitted by radio from the receiver. The signals are further transmitted to the connec- ted device (e.g.
Page 6
OVERVIEW ____________________________________________ The WT-AV 1 Receiver R • AUDIO • L OUT VIDEO OUT DC 9V DIP ON Antenna, transmits the remote control signals to the receiver, which are received via infra-red. The antenna must be positioned upright in order to function properly.
Page 7
CONNECTION ______________________________________ Connecting the WT-AV 1 Transmitter DIP ON e n a r o R • AUDIO • L IN VIDEO IN DC 9V DIP ON Note: Use the cinch/EURO-AV cable labelled ”for Transmitter”. Insert the EURO-AV plug of the cable in the EURO-AV socket of the signal source (e.g.
Page 8
Instead of using the cinch/Euro-AV cable, you can also use the cinch cable supplied with the Tharus 38 for the GRUNDIG Tharus 38 LCD TV. For the GRUNDIG Tharus 51 LCD TV ,please use the AV adapter and the cinch cable supplied with the Tharus 51 instead of the cinch/EURO-AV...
OPERATION __________________________________________ Operation with a WT-AV 1 system Switch on the transmitter and receiver by putting the power switch in the » « position. Switch on the signal source (e.g. DVD player). Switch on the television and select the channel position » AV« on the television.
INFORMATION _____________________________________ Troubleshooting If a problem occurs, first refer to this information before you take the device for repair. If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist. Under no circumstances should you attempt to repair the device yourself, as this would invalidate the guarantee.
TECHNICAL DATA ________________________________ The WT AV1 is noise-suppressed according to the applicable EU directives. 0682 These products fulfil the European directives 89/336/EEC and 73/23/EEC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and thus the international safety regulation IEC 60065. The type plate with information on the operating voltage and radio certifi- cation is located on the bottom of the device.
Need help?
Do you have a question about the WT-AV 1 and is the answer not in the manual?
Questions and answers