MONO/STEREO
Press "MONO/STEREO" (41) to select mono or stereo mode. When stereo mode is selected, ((ST)) will appear on the display
(if current station is FM stereo.)
STEREO
Mute
Press "MUTE" (6) to cut off the volume, the MUTE display will flash.
CD/MP3 Function
Loading a CD or MP3 Disc
1. Press the FUNCTION (21) to select CD mode. "CD" will appear on the display, and then "CD" will be replaced by "NO DISC. "
2. Lift up the CD door (18), then "OPEN" will be shown on the display.
3. Place a CD or MP3 disc on the tray with that label facing up.
4. Close the CD door. The system will automatically read the content of the CD or MP3 disc; if a CD disc is loaded, the
LCD display will total the number of tracks and the total playing time.
CD Disc
Track No.
If an MP3 disc is loaded, total Album number, tracks, "ESP" and "STOP" will be shown on the LCD display.
5. To remove the disc. press the STOP (23) button and then open the door,
handle the disc by its edge, do not touch the playing surface and carefully
remove it from the player.
continued page 8
Radio Operation
MONO
Note: Only FM is able to select "STEREO" or "MONO"
CD ESP
16 65 : 19
V i s i t u s o n l i n e a t c a l i f o n e . c o m
7
continued
MUTE (Flashing)
MUTE
Total Playing Time
07 ESP
033 STOP