Side Turn Signal Lights; Centre High-Mounted Brake Light - Opel COMBO Owner's Manual

4. Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal
from light housing.
6. Push bulb into socket slightly,
rotate anticlockwise, remove and
renew bulb.
Brake light (1)
Turn signal light (2)
Tail light (3)
Tail light/fog light (4)
7. Install seal on bulb holder
ensuring it is fitted correctly.
Install bulb holder in light housing
ensuring that it engages correctly.
Tighten the four retaining screws
using a screwdriver.
8. Install reverse light bulb holder
and turn clockwise to tighten.
Vehicle care
9. Engage connector plug.
10. Insert light housing in body,
ensuring correct positioning.
Tighten the three retaining
screws.

Side turn signal lights

Have bulbs replaced by a workshop.
Centre high-mounted
brake light
Have bulbs replaced by a workshop.
135