134
Vehicle care
2. Withdraw bulb holder from
reflector by turning anticlockwise.
3. Remove bulb from socket, insert
new bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light
1. Remove protective cover.
2. Withdraw bulb holder from
reflector by turning anticlockwise.
3. Push bulb into holder slightly,
rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Tail lights
1. Remove the three retaining
screws.
2. Remove light housing from
vehicle.
3. Disengage connector plug from
bulb holder.