Switching On And Off; Before Using For The First Time - Miele K 9457 iD-4 Operating And Installation Manual

Switching on and off

Before using for the first time

Protective foil
The stainless steel trim, frames and
panels have a layer of protective foil to
prevent scratching during
transportation.
^ Carefully remove the protective foil
from them.
Cleaning and care
^ After removing the protective foil,
treat stainless steel surfaces with the
Miele stainless steel conditioning
agent supplied with the appliance
(available to re-order from
www.miele-shop.com).
Important! Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
12
Switching on
^ Press the On/Off button.
The temperature display lights up, the
appliance starts cooling and the interior
light will come on when the door is
opened.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
^ Press the On/Off button until the
temperature display goes out.
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).