Check Filters; Showroom Programme; Factory Default; To Close The Settings Menu - Miele Dishwashers Operating Instructions Manual

Settings menu

Check filters

You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at the
factory to appear after every 50
programme cycles.
^ Select the interval you want and
confirm with the middle button
underneath the display.

Showroom programme

This programme is for demonstration
use only.
Demo with sound
–
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
Demo AutoOpen:
–
The door will open automatically.
To switch Demo mode on
^ Select the option you want.
^ Select
On
and confirm with the
middle button underneath the
display.
^ Come out of the Settings menu.
^ Press the Start/Stop button.
Demo mode will begin.
To switch Demo mode off
Demo mode will switch off automatically
when it reaches the end of the cycle.
72
:
:

Factory default

If you have altered any settings from
the factory default, you can reset them
back to the factory default settings.
^ Select
Reset to default
your selection with the middle button
underneath the display.

To close the Settings menu

Close
Use to come out of the Settings
menu.
^ Select
Close
and confirm your
selection with the middle button
underneath the display.
The display will then show the last
programme selected and the indicator
light for the programme selected will
come on.
and confirm