THOMSON SPEEDTOUCH 190 Setup And User Manual page 14

2 SpeedTouch™190 Web Interface
Security
12
Select Security to configure the SpeedTouch™190 user name and password:
By default the SpeedTouch™190 is not protected by a password. However, for security
reasons, setting a pssword may be useful.
To set a user name and password, proceed as follows:
Type a user name in the User name text box.
1
Type a password in the New password text box
2
Retype the password in the Confirm new password text box.
3
Click Save User Password to save the new password.
4
Use the same procedure to change your user name and password.
Note
To clear your user name and password, clear the textboxes and click
Note
Save User Password.
E-DOC-CTC-20040401-0004 v1.0