Alcatel OT-S920 User Manual page 48

G71_UM_GB-21-09-07 21/09/07
The Bluetooth function supported by your mobile phone meets
the requirements of Bluetooth Specification 1.2. However, how
successfully it works depends on the compatibility of the
Bluetooth devices you use. For more information, refer to the
user manuals of related devices, or consult the manufacturer of
related devices.
15.1.1 Bluetooth-Based Synchronisation
Your mobile phone can respond to data synchronisation requests from a
PC.
To operate the Bluetooth synchronisation with your mobile phone, Your
PC needs to support Bluetooth function.
1
Install the PC Suite embedded in your phone
2
Select Settings > Connectivity > Bluetooth > Switch On/Off >
On to enable the Bluetooth function.
3
Select Visibility > Visible.
4
Run the driver software for Bluetooth on the PC, and pair the moblie
phone. After the PC detects and recognises the mobile phone serial
port service, activate the Bluetooth serial port service of the mobile
phone.
5
Run the PC Suite on the PC.
6
Now you can operate the synchronisation. For details of the operation,
refer to the Help of the PC Suite.
93
8:38 Page 93
15.1.2 The Bluetooth Headset
You can answer or reject a call by a Bluetooth headset or Bluetooth
loudspeaker. During a call, switch between the Bluetooth headset and the
phone. For details, refer to the corresponding user manual of a Bluetooth
headset or loudspeaker.
Select Settings > Connectivity > Bluetooth to access the Bluetooth
Settings screen.
To use a Bluetooth headset, do as follows.
1
Set the Bluetooth headset to the status for detecting.
2
Select Switch On/Off > On from the Bluetooth settings list to enable
the device. A Bluetooth device icon appears on the icon bar.
3
Select Devices and then select Search. When the Bluetooth headset
is found, its profile is displayed in the device list.
4
If a Bluetooth headset is detected and recognised for the first time, it
should be authenticated by the PIN code.
Now you can use the Bluetooth headset as the connection has been
established between your phone and the Bluetooth headset.
The Bluetooth headset should be set to the status for detecting only when
authentication is needed. Once the headset has been authenticated, you
just need to turn on your Bluetooth headset. For more information, refer
to the user manual of your Bluetooth headset.
94