Dual BAK1500 Installation & Owner's Manual page 6

REMOTE
BASS
CONTROL
Main Power Connections
Connect BAT+, GND and REM wires accordingly. A suitable fuse MUST be installed on the
BAT+ lead within 18" of the battery for protection of the vehicle's electrical system.
Fuse Rating
When replacing the fuse, make
sure new fuse is the correct type
and amperage. Using an incorrect
fuse could damage the amplifier.
The BAK1500 uses (1) 10 amp ATO
style fuse.
6
INSTALLATION
Typical Wire Routing
BATTERY
HIGH LEVEL INPUT
(SPEAKER WIRE)
POWER
. .
MIN MAX
Power/Ground Wire Size
For optimum performance, use only
12 gauge wire or larger. Make sure
to use the same size power and
ground wire.