Xante Accel-a-Writer 812 Troubleshooting Manual page 23

•
§ When I send a file to be printed, page after page of text prints
and the type looks like a program listing.
Possible Solutions:
•
•
•
_____________________________________ Troubleshooting 10-23
Make sure the paper stop on the output tray is
adjusted for legal, not letter size output.
Make sure the printer and application settings are the
same. If you are printing a PostScript document, the
printer needs to be in PostScript or AIS mode. If you
are printing a PCL 5 document, the printer needs to
be in PCL5 or AIS mode. If you are printing an
HP-GL 7475A document, the printer needs to be in
HP–GL 7475A mode.
If the file is a PostScript file and the printer is set to
automatic emulation sensing, put the printer in
PostScript mode and send the PostScript document
again.
Send a copy of the file that is giving you trouble to
XANTÉ's Technical Support with a brief description
of the problems. See "Calling for Technical
Support" later in this chapter for details.