Xante Accel-a-Writer 812 Options Manual page 18

c. Tilt the SIMM to be removed forward towards you to a
45˚ angle and slide it up and out of the bank (fig. 9.14).
d. Remove the upgrade SIMM from its protective bag.
e. Align the new SIMM with the notched corner down and
the SIMM tilted to the right at a 45˚ angle to the
controller board over the appropriate bank (fig. 9.14).
Then insert the SIMM into the bank's connector.
Notch
Caution:
9-18 Optionsbb
Fig. 9.13 Open the Bank Latches
45
Fig. 9.14 Installing a SIMM
A SIMM only fits in one direction. Do not
force a SIMM in place. If it does not go in
easily, realign it making sure that the
notched corner is down and that the SIMM
seats correctly in the bank.
___________________________________________
90