Table of Contents
Advertisement
4-6 Installation of 5.25" Front Device Bay
4-6.1
Detach the front panel (see step 1-3.2 on page 5) and remove
the mesh drive rail from the front panel.
4-6.2
Remove the front EMI plate and attach the
front panel onto the chassis.
4-6.3
Slide the 5.25" device into the drive bay
from the front of the chassis.
4-6.4
Secure the 5.25" device with the internal
latch. Refer to the figure for installation
procedure.
4-7 Installation of 3.5" Front Device Bay
Installation of 3.5" front device is the same as 5.25" front devices,
please refer to step 4-6.
4-8 Installation of 3.5" Internal Device Bay
The iSolo 210 provides built-in bays to accommodate up to 3 hard
disc drives. The built-in HDD requires securing runners, which can
be found in the accessory box.
Required tools: Securing runners (2 per hard disc drive)
1
Lock
Advertisement
Table of Contents
