Network And Usb Connection; Connecting To The Network Terminal; Connecting To The Usb Connector - Yamaha BD-S473 Owner's Manual

■ Connecting to the NETWORK terminal

– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 20 regarding further information on BD-Live functions.
Notes
– Firmly connect a network cable (commercially available) to the NETWORK terminal.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
– When using a broadband internet connection, a contract with an internet service provider is required. For more
details, contact your nearest internet service provider.
– Refer to the operation manual of the equipment you have as the connected equipment and connection method may
differ depending on your internet environment.
– Use a network cable/router supporting 10BASE-T/100BASE-TX.

■ Connecting to the USB connector

– You can connect a USB memory device for Local Storage to the USB connector on the rear panel (or front panel) of
this Player to save the BD-Live data, or to upgrade the software of this Player.
– Firmly connect a USB memory device (commercially available) to the USB connector.
CAUTION:
– Do not remove the USB memory device or
unplug the power cable while the operations for
BD-Live (p. 20) or software upgrade are being
performed.
– Do not use a USB extension cable when
connecting a USB memory device to the USB
connector of this Player. Using a USB
extension cable may prevent the Player from
performing correctly.
Note
– Yamaha cannot guarantee that all brands' USB
memory devices will operate with this Player.
After connecting
– When you set the Network setting manually, refer to "Network" (p. 25).
– To play back the PC contents on your network, refer to "Using network content" (p. 15).

Network and USB connection

HDMI
To USB
connector
Hint
– To save BD-Live data on
Internet
This Player
NETWORK
USB 5V 0.5A
USB memory device
(commercially available)
the USB memory device
on the front panel, set
Local Storage to Front
USB (p. 24).
LAN
Modem
Hub or
broadband router
To NETWORK
terminal
Network cable
(commercially available)
To LAN
terminal
PC
11
En
2