5. Controls and Functions A. ON/OFF Pairing and Intercom Linking Button – Used for turning on/off, pairing mode for Bluetooth, and linking headsets for intercom use. B. Multifunction Button – Used for answering cell phone calls; rejecting cell phone calls, toggling between music from an A2DP device or the Built in FM Stereo Radio.
Page 4
6A. Installation Instructions For Full Coverage J&M Wireless 465 Series Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or the specific helmet into which this equipment is installed.
Page 5
6B. Installation Instructions For Most Open-Face & Flip Front Style Helmets J&M Wireless 465 Series Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or the specific helmet into which this equipment is installed.
Page 6
7. General Operation of the HS-WLS465 1. Plug the supplied AC adapter into the rear jack (D) on the HS-WLS465. 5. For volume-down adjustments on Bluetooth A2DP music, FM Radio, The red LED will turn on to indicate that the Battery is charging. The Cell Phone, and/or intercom, press and hold the volume-down button.
Page 7
Pairing and Operation with a Bluetooth Enabled Cell/Smart 5. Turn off both the second and third headset and then put the first HS-WLS465 headset back into pairing mode and put the third Phone and a Bluetooth Enabled MP3 Player or Stereo Dongle. HS-WLS465 headset back into pairing mode and then press the ON/ 1.