Advertisement
Quick Links
Advertisement
Related Manuals for J&M Corporation HS-BLU277EDR Series
Summary of Contents for J&M Corporation HS-BLU277EDR Series
- Page 1 Bluetooth Helmet Headset #HS-BLU277EDR Series Owner’s Manual...
- Page 2 OTHER MEDICAL DEVICES If you use any other personal medical device, consult the manufacturer J&M's #HS-BLU277EDR series are full-fidelity stereo Bluetooth wireless of the device to determine if it is adequately shielded from RF energy. helmet headsets, designed for installation into most open-face, flip-front Your physician may be able to assist you in obtaining this information.
-
Page 3: Controls And Functions
POWER LINKED/ PAIRING 5. Controls and Functions A. Multifunction Button – Used for turning on/off Bluetooth, pairing mode for Bluetooth, answering cell phone, and other multifunction features. B. Bluetooth Volume Up – Allows Bluetooth volume up adjustment. C. Bluetooth Volume Down – Allows Bluetooth volume down adjustment. D. - Page 4 6A. Installation Instructions For Full Coverage & Flip Front Style Helmets J&M Bluetooth Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equip- ment, the quality of installation, or the specific helmet into which this equipment is installed.
- Page 5 6B. Installation Instructions For 3/4 Style Helmets J&M Bluetooth Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equip- ment, the quality of installation, or the specific helmet into which this equipment is installed.
- Page 6 7. General Operation of the HS-BLU277 1. Plug the supplied AC adapter into the rear jack (F) on the HS-BLU277. hold down on the multifunction button (A) continuously for about 13 The red LED will flash to indicate that the Battery is charging. The red seconds, or until the blue light begins a rapid flash, at which point the LED will go steady when the battery is fully charged (3.9v) and ready HS-BLU277 is now in pairing mode.
- Page 7 5. While listening to music through the MP3 player or Dongle, if the cell 3. Use the volume Up (B) or Down (C) buttons on the HS-BLU277 head- phone receives an incoming call, the music will be interrupted and set to adjust the headset volume levels. incoming call indicator "alert-tone"...
- Page 8 Note: J&M’s Bluetooth helmet-to-helmet intercom software profile (JMDPI) was ing and holding the volume-up button (B) together with pressing and designed for wireless driver/passenger (same motorcycle) communications, and holding the multifunction button (A) for about 35 seconds, or until the while it can be used for bike-to-bike communications, the long range performance blue LED flashes rapidly.