Gigabyte GA-C1007UN User Manual page 13

5) IDE (IDE Connector)
j
The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching
the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices, remember
to set the jumpers and the cabling according to the role of the IDE devices (for example, master or slave).
(For information about configuring master/slave settings for the IDE devices, read the instructions from the
device manufacturers.)
6) SATA3 0 (SATA 6Gb/s Connector, Controlled by Intel NM70 Chipset)
The SATA connector conforms to SATA 6Gb/s standard and is compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device.
7) SATA2 1/2 (SATA 3Gb/s Connectors, Controlled by Intel NM70 Chipset)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.
Each SATA connector supports a single SATA device.
7
GA-C1007UN.
j Only for the
40 39
2
1
Pin No. Definition
1
SATA3
0
2
1
3
4
5
6
7
7
Pin No. Definition
1
SATA2
2
1
2 1
3
4
1
5
6
7
7
- 13 -
DEBUG
PORT
DEBUG
GND
PORT
TXP
TXN
DEBUG
GND
PORT
RXN
RXP
GND
GND
TXP
TXN
GND
RXN
RXP
GND