Gigabyte G1.ASSASSIN 2 User Manual page 52

USB Storage Devices
&
Displays a list of connected USB mass storage devices. You can configure how each device is going to be
treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto)
Marvell ATA Controller Configuration
`
GSATA Controller (Marvell 88SE9172 Chip, GSATA3 6 and GSATA3 7 connectors)
&
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures
the SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.
RAID Mode Enables RAID for the SATA controllers.

AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers.

GSATA Controller (Marvell 88SE9172 Chip, eSATA3 Connectors on the Back Panel)
&
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures
the SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.
RAID Mode Enables RAID for the SATA controllers.

AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers.

BIOS Setup - 52 -