Peripherals - Gigabyte G1.ASSASSIN 2 User Manual

2-6

Peripherals

USB 2.0 Devices (Intel X79 Chipset)
&
Enables or disables the USB 2.0 controllers integrated with the Intel X79 Chipset. (Default: Enabled)
Intel SATA Control Mode
&
Enables or disables RAID for the SATA controllers integrated in the Intel X79 Chipset or configures the
SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.
RAID Mode Enables RAID for the SATA controllers.

AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers.

Legacy USB Support
&
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
USB3.0 Support (Fresco FL1009 USB Controllers)
&
Enables or disables the Fresco FL1009 USB 3.0 controllers. (Default: Enabled)
XHCI Hand-off
&
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
EHCI Hand-off
&
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
Port 60/64 Emulation
&
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Enabled)
- 51 - BIOS Setup