Gigabyte GA-586T2 User Manual page 87

GA-586T2
Onboard Serial Port 2
The default value is Auto.
3F8/IRQ4 Enable onboard Serial port B and address is 3F8.
2F8/IRQ3 Enable onboard Serial port B and address is 2F8.
3E8/IRQ4 Enable onboard Serial port B and address is 3E8.
2E8/IRQ3 Enable onboard Serial port B and address is 2E8.
Disabled Disable onboard Serial port B.
Auto onboard Serial port B automatically set.
Onboard Parallel port
The default value is 378/IRQ7.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7.
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Disabled Disable onboard LPT port.
Parallel Port Mode
The default value is SPP.
SPP Using Parallel port as Normal Printer Port.
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as Extended Capabilities Port
mode/Enhanced Parallel Port.
¯
As ECP,ECP+EPP Mode is selected, two options can be defined:
1. ECP Mode use DMA: 3
2. ECP Mode use DMA: 1
¯
4-31
¯