6BX
Reset Configuration Data
The default value is Disabled.
Disabled
Disable this function.
Enabled
Enable clear PnP information in ESCD.
IRQ (3,4,5,7,9,10,11,12,14,15), DMA(0,1,3,5,6,7) assigned to
The default value is "Legacy ISA" or "PCI/ISA PnP".
Legacy ISA
The resource is used by Legacy ISA device.
PCI/ISA PnP
The resource is used by PCI/ISA PnP device (PCI or ISA).
Used MEM base addr.
The default value is N/A.
N/A
Disable the MEM. block using.
C800 ~ DC00
Select the MEM. block starting address.
Used MEM Length
The default value is 8K.
8K ~ 64K
Select the MEM. block size.
Assign IRQ For USB
The default value is Enabled.
Enabled
Assign a specific IRQ for USB
Disabled
No IRQ is assigned for USB
4-22