Integrated Peripherals - Gigabyte 5AX User Manual

5AX

4.12. INTEGRATED PERIPHERALS

@ When KB PWR ON/OFF Function set Enabled, KB PWR ON/OFF Password :
Enter will show up.
* These three items will show up when RTC Alarm Controller is enabled.
% These two items will show up when Onboard IrDA Port is Assign Available
Address# for IrDA port.
# These two items will show up when IrDA Mode is IrDA 1.1.
On-Chip Primary IDE
The default value is Enabled.
Enabled Enable onboard 1st channel IDE port.
Disabled Disable onboard 1st channel IDE port.
Master PIO (for onboard IDE 1st channel).
The default value is Auto.
Auto BIOS will automatically detect the IDE HDD Accessing
mode.
Mode0~4 Manually set the IDE Accessing mode.
P
Figure 4.9: Integrated peripherals
4-26