Power Management Setup - Gigabyte 5AX User Manual

5AX

4.8. POWER MANAGEMENT SETUP

Figure 4.5: Power Management Setup
Power Management
The default value is Enabled.
Enabled Enable Green function.
Disabled Disable Green function.
PM Control by APM
The default value is Yes.
Yes Enable software APM function.
No Disable software APM function.
MODEM use IRQ
The default value is 3.
NA No use IRQ for Modem.
3~5,7,9~11 Assign Available IRQ# for Modem.
Video off Option
The default value is Suspend.
Suspend
Always On
Set Video off if system enter Suspend Mode.
Set Video always on.
4-18