Washing The Vehicle; Polishing The Vehicle - Polaris SPORTSMAN FOREST 800 Series Owner's Manual

6x6
Table of Contents

Advertisement

MAINTENANCE
Cleaning and Storage

Washing the Vehicle

If a high pressure water system is used for cleaning (not recommended),
exercise extreme caution. The water may damage components and could
remove paint and decals. Avoid directing the water stream at the follow-
ing items:
• Wheel bearings
• Radiator
• Transmission seals
• Cab and body panels
If an informational or graphic label becomes illegible or comes off, con-
tact your POLARIS dealer to purchase a replacement. Replacement
safety labels are provided by POLARIS at no charge.
Grease all zerk fittings immediately after washing. Allow the engine to
run for a while to evaporate any water that may have entered the engine
or exhaust system.

Polishing the Vehicle

POLARIS recommends the use of common household aerosol furniture
polish for polishing the finish on your POLARIS vehicle. Follow the
instructions on the container.
Polishing Tips
• Avoid the use of automotive products, some of which can scratch the
finish of your vehicle.
• Always use clean cloths and pads for cleaning and polishing. Old or
reused cloths and pads may contain dirt particles that will scratch the
finish.
116
• Electrical components
• Switches and controls
• Fuel system components
• Labels and decals

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sportsman forest 800 6x6

Table of Contents