Preheat; Using The Override Function - Rinnai Avenger 25 Operation Manual

TIMER OPERATION - AVENGER, BLAZE & DYNAMO

PREHEAT

This function operates automatically in
conjunction with the Timers. When a Timer is
selected, the heater may operate anywhere
within an hour prior to the programmed
starting time of a Timer.
This function is called Pre-heat since it
ensures the room reaches the desired
temperature by the On Time programmed
into the Timer(s). The room temperature is
sensed one hour before the programmed On
Time.
The temperature differential at the time of sensing the room temperature combined with the data from
previous operation governs exactly how long before the programmed On time the micro-computer will
operate the heater and ignite the burner.

USING THE OVERRIDE FUNCTION

This function is used to manually override the current operation of the heater. For example: if the
heater is between the finishing and starting times of a timer program and the Override button is
selected, then the heater will begin to operate and heat the room.
The heater must be between the finishing and starting times of a timer program for the Override to
function to work. Either of the Timer indicators
indicator is illuminated green when this is the case. If the Overrrided button
12
Override indicator
26
will now start and full manual control will now be available.
To cancel override and to return to Timer operation press the Override button
indicator will go out and the and Combustion indicator
26
timer operation has been restored and that the heater is awaiting a timer operation to begin. If the
Override button is not pressed the heater will remain on until the next programmed Off time setting
25
is reached.
If the ON/OFF button
heater will be turned off and the timer programs will not operate.
NOTE
Rinnai Australia
22 24 26
21
23
25
will flash to show that the heater is now operating in override mode. The heater
or the OFF button
18
or will be illuminated and the Combustion
22 24
will be illuminated green to confirm that
12
on the remote control are pressed the
40
13
ON
OFF
2
20 12
is pressed the
25
again. The Override
25
Operation Manual
39
40
41