Troubleshooting Your Biosmart® Heater - Bio Smart Technologies BioSmart BIO-1500PCPremium Classic Edition Owner's Manual

Troubleshooting Your BioSmart® Heater
Problem
The heater's airflow has
been reduced.
The heater stays on after I
push the Power button to
turn it off.
The heater's display is
showing a line of dots.
Heater thermostat
temperature does not
match wall thermostat
temperature
The heater will not turn on.
Solution
Make sure the electrostatic filter is clean (see
Maintenance).
Check front grill and look behind rear air intake
for any objects that could obstruct airflow.
If the heater's airflow is still diminished or has
stopped, please call Customer Support.
This is a normal function of the heater. DO NOT
unplug the heater until you no longer hear the
fan running. During this time, the heater is
cooling down.
This is part of the heater's normal operation.
After a period of inactivity, the heater will enter
into a "screen saver" mode to conserve power.
This will not affect the heater's operation.
When any function key is pressed, the heater's
display will reappear.
Follow the directions for internal thermostat
calibration on Page 23.
Test the outlet to make sure there is power
available and then check the heater display for
the flashing TIME DELAY light (1500PC). Press
the POWER button to turn off the timer and
resume normal operation of the heater.
©2010 BioSmart Technologies
Page 18