There are three methods of powering the MK361. Only use one method at one time Soundcard as power source or Using the supplied self powered connector cable connect the 5 pin male plug to the Evolution MK-249 MIDI keyboard and the 15 pin male plug to the MIDI port on your PC soundcard.
PROGRAM & BANK CHANGE MEMORY You can assign a selected PROGRAM CHANGE as well as a BANK LSB and a BANK MSB to one of ten numeric keys (0-9). Once stored, simply pressing one of the numeric keys will send the desired PROGRAM and BANK CHANGES.
WHEEL ASSIGN Use the WHEEL to transmit MIDI CONTROL CHANGE messages. You can select and assign 119 types of MIDI functions (1-31, 33-95, 102-121, 128-132) Number Functions 1 –127 Standard MIDI controllers Pitch Bend Sensitivity Fine Tune Coarse Tune Channel Pressure Velocity Press the WHEEL ASSIGN switches (MEMORY &...
Selecting a VELOCITY CURVE The VELOCITY CURVEs determine the relationship between how hard the keys are struck and the corresponding velocity that the unit transmits. This unit allows you to select from 12 VELOCITY CURVEs. Simultaneously press the WHEEL ASSIGN and CHANNEL switches. The LED starts to flash showing the current number of the VELOCITY CURVE.
:Active Sense :Reset Notes: set to 0 or X : Can be For support email support@evolution.co.uk Latest drivers and information at www.evolution.co.uk Join the Evolution User’s group at Yahoo groups. Go to this website: www.yahoogroups.com/group/evolution-users, or e-mail to this address :evolution-users-subscribe@yahoogroups.com...
Need help?
Do you have a question about the MK361 and is the answer not in the manual?
Questions and answers