Table of Contents
Advertisement
22 electrolux
Installation
Unpacking
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it's back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable, the
draining hose and inlet hose (if mounted)
from the hose holders on the rear of the
appliance.
3. Unscrew and remove the central rear bolt
A with the supplied spanner . Slide out
the relevant plastic spacer.
4. Unscrew and remove the two large rear
bolts B and the six smaller bolts C .
Hide quick links:
Advertisement
Table of Contents
