Using Flat Wrappers; Using Optional Printer (Rtp-1) - Royal Sovereign FS-44P Owner's Manual

uSinG Flat wraPPerS

1. Allow coins to fall directly into plastic tubes. Do not place flat wrappers into plastic tubes while operating.
2. Remove full coin tubes after sorting.
3. Hold a flat wrapper open by placing your index finger slightly inside the end of the wrapper. Slide the flat wrapper over the
top few coins in the tube.
4. While gently pushing the wrapper toward the bottom of the coin tube, tilt the coin tube so that the coins slide into the
wrapper. When the wrapper touches the bottom of the coin tube, hold the tube upright, and then fold the top of the
wrapper.
5. Turn the coin tube upside down and remove the coin-filled wrapper. Fold over the other end of the wrapper.

uSinG oPtional Printer (rtP-1)

The FS-44P has an optional printer port that allows printing with Royal Sovereign optional thermal printer model RTP-1
1. Connect both ends of the serial cable supplied with the RTP-1 optional printer to FS-44P and RTP-1
2. Follow operation instructions for setting up the RTP-1 in the RTP-1 user manual.
3. Press the PRINT button to print totals from the FS-44P display to the RTP-1 printer.
8