AEG FAVORIT 50660 User Information page 13

Activating rinse aid inflow when 3in1 function is se-
lected
3
If the 3in1 function is not selected, the rinse aid inflow is always acti-
vated.
If the 3in1 function is selected due to the use of 3in1 detergent, the
rinse aid inflow is deactivated. If the dishes then do not dry sufficiently,
you should re-activate the rinse aid inflow (see also section "Using 3in1
detergents").
1. Press the ON/OFF button.
3
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected
light up.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 4 will flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The indicator for the end of the dishwashing cycle will display the cur-
rent setting:
Indicator for the end of the cycle is lit:
Indicator for the end of the cycle is not lit:
4. Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
5. When the rinse aid inflow setting is correct, press the ON/OFF button.
The setting for the rinse aid inflow is now saved.
Rinse aid inflow activated when 3in1
on
Rinse aid inflow deactivated when
3in1 on (factory setting)
13