Teac LCDV2656HDR User Manual page 35

Recording Operation
Electronic Program Guide (EPG)
Press the EPG button to display the OSD menu as below:
Once the program of choice has been highlighted, press the REC button on the remote control. This
will bring you to Record Mode, where you can set the start and end time of the recording.
Record Mode
Setting the Record Mode
The TV will record the program automatically according to the
set time.
TITLE: Display the name of the recording program.
MODE: Select the record mode.
Start Time: Set the start recording time.
End Time: Set the end recording time.
Press OK button to save the setting and exit the menu.
NOTE:
- If channel locks or parental control locks are enabled, the locked programmes and channels
can be recorded, viewed and played back on this TV using password access. Key in your current
password when the password prompt pops up.
- While recording is in progress for a locked channel, you will still need to key in the password to
watch that channel. This does not interrupt the recording process.
To view the Schedule List, press MENU, under the CHANNEL tab, scroll down to Schedule List, and
press OK to view the schedule of recording.
31
Details information
of selected
program.
Program list for the
current channel.
Press direction
buttons to navigate
the lists.