Fender ‘65 TWIN REVERB Owner's Manual page 4

L M
TREBLE CONTROL-Adjusts the amount of high frequency boost or cut in the VIBRATO CHANNEL.
L.
MIDDLE CONTROL-Adjusts the amount of mid-range frequency boost or cut in the VIBRATO CHANNEL.
M.
N. BASS CONTROL-Adjusts the amount of low frequency boost or cut in the VIBRATO CHANNEL.
Note: If all tone controls are full counter-clockwise, there will be no sound.
REVERB CONTROL-Adjusts the amount of reverberated signal that is mixed in with the original dry signal. Turning the
0.
control full counter-clockwise turns the REVERB feature off. The REVERB feature can also be turned on and off using the
footswitch. Note that the REVERB feature does not affect the NORMAL CHANNEL.
P. VIBRATO SPEED CONTROL-Adjusts the speed of the VIBRATO feature. Note that the VIBRATO feature does not affect
the NORMAL CHANNEL.
VIBRATO INTENSITY CONTROL-Adjusts the intensity of the VIBRATO feature. Turning the control full counter-clockwise turns
0.
the VIBRATO feature off. The VIBRATO feature can also be turned on and off using the footswitch. Note that the VIBRATO
feature does not affect the NORMAL CHANNEL.
R. PILOT LAMP-When the lamp is illuminated, the '65 TWIN REVERB is receiving power. Should the lamp burn out, unscrew
the red jewel and replace the lamp with a type T47 light bulb.
O P
N
Q R