Table of Contents
Advertisement
Detergent solution
pump
Notes on blockages
Draining the water
Cleaning the detergent solution pump
Remove the drain hose from its retainer.
Remove the sealing cap from the drain tube and allow the water to
drain off.
– The container for the drained water may have to be emptied several
times.
– When no more water emerges, refit the sealing cap.
Place the drain hose into the retainer.
Carefully unscrew the pump cover (remaining water).
– Clean the interior, pump cover threads and pump housing (it must
be possible to turn the impeller).
Replace the pump cover and screw it down.
Place the servicing flap into the 4 clip-in slots and fasten to the housing
with the lock pin.
To prevent detergent flowing unused into the outlet the next time laundry
i
is washed:
Pour 1 litre of water into compartment II and start the Empty programme.
Set the programme selector to Stop (Off).
Use a screwdriver to release the lock pins.
Fold up the servicing panel and remove it
upwards.
16
Advertisement
Table of Contents
