Connectors And Indicators - Tascam IF-TAD Owner's Manual

IF-TAD Interface
1

Connectors and indicators

1
Power connector and indicator
Connect the PS-P414 adapter supplied with the IF-TAD to this
inlet. When power is supplied at the correct voltage, the green
indicator will light.
Always use only the PS-P414 power supply designed
for use with the IF-TAD. Do not use any other power
adapter, or damage may occur to the IF-TAD.
2
WORD SYNC OUT
This BNC connector provides a standard word clock output, based
on the word clock derived from the unit to the connected adat
device.
3
TDIF-1 connector
Use this connector with a unit equipped with a TDIF-1 interface
(for example, a DTRS recorder or a digital mixing console).
10
– TASCAM IF-TAD
WARNING