IMPORTANT Safety Instructions PART I: Turntable Operation Turntable Part Names / Functions Listening to a Record PART II: Record from Turntable to PC or Mac Audacity Audacity Software & USB Connection Audacity for PC Set Up Wizard: How to Set Up with PC Installing Audacity Software on your PC Audacity Control Panel &...
In order to completely turn off the unit, unplug the power cord from the wall outlet. Keep this manual for future reference. PART I: Turntable Operation Turntable Part Names / Functions WARNING CAUTION magnitude to cause electric shock to persons.
Make sure the red RCA and white RCA are inserted in the red & white jacks accordingly. 4. Place a record on the turntable and select the player speed (33/45/78) (6) according to the desired record speed. NOTE: when playing a 45 rpm record, use the 45 rpm adapter (3) 5.
Your PC and Audacity must recognize your USB connection to your VINYLWRITER PRO turntable. Therefore, always turn on your computer and connect the USB cable to the turntable’s and the computer’s USB port. Then, with the AC adapter connected to your VINYLWRITER PRO turntable, move the tone arm toward the album to start the turntable.
Audacity for PC Set Up Wizard: How to Set Up with PC To open the Set Up Wizard and install Audacity to your computer follow these steps: Insert the Audacity software disk that comes with your unit. Go to My Computer and double click the CD ROM Drive. NOTE: The CD may automatically launch the Set Up Wizard.
Installing Audacity Software on your PC The Audacity Setup Wizard will appear, Click on Next > to begin the software install process. Click on “I accept the agreement” and click on Next.
Page 9
be sure the box beside the Create a desktop icon is selected so that a shortcut NOTE: to the Audacity program is saved on your Desktop. Click on the Install button to start installation.
Page 10
Click on Finish to complete installation. You can now open the Audacity software and start recording your files using Audacity: Once installed, you should NOT have to re-install the Audacity software again. NOTE: For additional information regarding Audacity features & applications, please visit the Audacity website at: http://audacity.sourceforge.net...
Audacity Control Panel & Configuring Audacity Settings Audacity Control Panel Buttons & Settings The Audacity control panel is the interface to apply recording settings & operate recording controls. Use the File and Edit to save, export and modify setting Preferences (View, Project, Generate, Effect and Analyze menus are advanced features to edit audio recordings).
You should be able to connect your VINYLWRITER PRO to your computer with the USB cord, power on your turntable then open Audacity, press play on your play, record on the Audacity control panel and begin to record. However, in some instances you may have to configure the settings (Preferences).
Page 13
NOTE: audio cannot be played over your computer speakers while recording. Alternatively, listen to the audio being recorded over the VINYLWRITER PRO turntable’s built-in speaker. Click “OK” Adjust the output and input volume. Due to variations between different operation system (OS), input volume control NOTE: feature may NOT work on some Windows versions.
Recording to a PC To record audio to your computer: 1. Place your album on the turntable platter and align the cartridge slightly ahead of the track you want to begin recording. Lower the cartridge (needle) to the album. 2. Click the Record button to start recording.
Record to CD or MP3 by copying or dragging the recorded files from the saved location on your PC to Windows Media Turntable or iTunes platform. From either platform your recordings can be burned to CD or converted to MP3 as desired.
1. NO AUDIO during PLAYBACK When the Turntable is connected to your PC over the USB, the default playback d evice changes to the USB Audio CODEC while connected. Solution (1) Preferred: Disconnect the USB cable from the PC.
Page 17
NO AUDIO during RECORDING Audio may NOT be heard from the your computer speakers when recording (downloading) from your VINYLWRITER PRO to your PC. Go to the Audacity Control Panel, click Edit and select “Preference”. Solution: Select the “Audio I/O” tab and select the box for Software Playthrough (Play new track while recording it) and Click “OK”...
Windows 7 (& Vista systems): Recording Level Adjustments IF the fluctuant wave does not appear on the Audacity Control Panel, or if RECORDING: the audio is distorted when recording, adjust the recording level as follows: Click “Start” and select Control Panel In Classic View, double click the Sound icon Or in Control Panel Home view, click “Hardware and Sound”.
Page 19
In the Sound window, select the “Recording” tab. Select a recording device. RECOMMENDATION: select Microphone of USB Audio CODEC as shown in the example below and click “Properties”.
Page 20
Select “Levels” and adjust the Volume Reading. The reading is from 0 to 100. Normally the level should be 3-8. However, you may indicate on the Input Level Indicator in the Audacity control panel that the level does not exceed 0. Microphone properties and sound interface.
Audacity for Mac Set Up Wizard: How to Set Up & Record to Mac Insert the Audacity software disk included with your unit. Click the Audacity disk on the Desktop. There are five folders in the Audacity disk. Double click Audacity_for_MAC for Macintosh system, and select Audacity_for_WIN for Windows system.
Your Mac and Audacity must recognize your USB connection to your VINYLWRITER PRO turntable. Therefore, always turn on your computer and connect the USB cable to the turntable’s and the computer’s USB port. Then, with the AC adapter connected to your turntable, move the tone arm towards the album to start the turntable.
At the top of the main Audacity window, to the right of the play control buttons, you will see the input and output level meters (labeled L and R). Under the output level meter is an icon that looks like a microphone. Next to the microphone is a black arrow that points down.
Select the box beside Software Playthrough Play new track while recording it Select the box beside Hardware Playthrough Play new track while recording it Click “OK” Note: IF you do not find “microphone (USB Audio CODEC)” as a selection, close Audacity, unplug and plug-in the USB cord to your PC and open Audacity again.
Record to CD by copying or dragging the recorded files from the saved location on your PC to Windows Media Turntable or iTunes platform. From either platform your recordings can be burned to CD or converted to another audio format as may be desired.
If you must use a stylus cleaning fluid, use very sparingly. • Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of mild detergent solution to clean the turntable and dust cover.
NOT RECORDING from Turntable to Mac SOLUTION: STEP 1. Confirm the USB cable is connected to your Mac and turntable. Highlight the Apple icon in the menu bar and select System Preferences.. Hardware section, select Sound, then select USB Audio CODEC as the sound input device STEP 2.
Page 28
USB input for the recording device. • Power Cycle: Close Audacity, turn off the turntable, unplug the USB Cable. Then plug in the USB Cable, turn on the turntable, and reopen Audacity. •...
Warranty • Your VINYLWRITER PRO (GDI-VW05) is supported by a limited manufacturer’s warranty for product defects in material or workmanship that may be evident under normal use for 1 year from date of purchase from an authorized franchisee or dealer.
Need help?
Do you have a question about the Vinylwriter Pro GDI-VW05 and is the answer not in the manual?
Questions and answers