Charging - Doro PHONEEASY 615 Manual

CAUTION
Only use batteries, charger and accessories that have been
approved for use with this particular model. Connecting other
accessories may be dangerous and may invalidate the phone's type
approval and guarantee.
When the battery is running low,
signal is heard. To charge the battery, connect the mains adapter to a
wall socket and to the charging socket y.
is displayed briefly when the charger is connected to the phone,
and when it is disconnected. The battery charge indicator will
be animated while charging. It takes approximately 3 hours to fully
charge the battery.
is displayed on the screen when charging is completed. If the
phone is turned off when the charger is connected to the phone only
the battery charge indicator will be shown on the display.
Note!
To save power the LCD backlight goes off after a while. Press any
key to illuminate the display. Full battery capacity will not be
reached until the battery has been charged 3–4 times. Batteries
degrade over time, which means that call time and standby time
will normally decrease with regular use.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall outlet.
English

Charging

is displayed and a warning
3