Franklin Collins DMQ-1490 User Manual page 66

your device, which will permanently
erase all the information stored in the
databank.
1. Press ORG and then press
DATA.
2. Highlight Set Password and
then press ENTER.
3. Type a password of up to eight
characters and press ENTER.
Use
BACK to delete.
4. Press C to confirm or CLEAR to
cancel the password.
The password you set will be
requested the first time that the
databank is used during a
session.
5. To change the password, repeat
Steps 1-4.
To remove a password, press
ENTER at the blank password
screen.
to move the cursor; use