Conversion From Natural To Lpg Gas - Electrolux EK 5731 Instruction Booklet

Conversion from Natural to LPG Gas

IMPORTANT
The replacement/conversion of the gas hob should
only be undertaken by a CORGI registered
engineer.
It is important to note that this model is designed for
use with natural gas but can be converted for use with
butane or propane gas providing the correct injectors
are fitted. The gas rate is adjusted to suit.
Method
• Ensure that the gas taps are in the 'OFF' position
• Isolate the hob from the electricity supply
• Remove all pan supports, burner caps, rings, crowns
and control knobs.
• With the aid of a 7mm box spanner the burner
injectors can then be unscrewed and replaced by the
appropriate LPG injectors (see Table: page 19).
TO ADJUST THE GAS RATE
With the aid of a thin bladed screwdriver completely
tighten clockwise the by pass screw. Upon
completion stick the replacement rating plate near the
gas supply pipe.
25