Creating A Stereo Pair - Sonos Controller for iPad Product Manual

2-8
Turning off the alarm
When the alarm goes off, you can touch

Creating a Stereo Pair

The Stereo Pair setting allows you to group two PLAY:1s, PLAY:3s or PLAY:5s in the same room to create a wider stereo
experience. In this configuration, one component serves as the left channel and the other serves as the right channel. You
cannot create a mixed stereo pair—the Sonos components in the stereo pair must be the same.
Optimum placement information
• When creating a stereo pair, it is best to place the two Sonos components 8 to 10 feet away from each other.
• Your favorite listening position should be 8 to 12 feet from the units. Less distance increases bass, more distance
improves stereo imaging.
Note: The Stereo Pair setting is for use with PLAY:1s, PLAY:3s and PLAY:5s only. You cannot
create a mixed stereo pair—both Sonos components in the stereo pair must be the same.
From the Settings menu, touch Room Settings.
1.
on the Sonos Controller for iPad to turn off the alarm.
Product Guide