Creating A Stereo Pair - Sonos Controller for iPad Product Manual

Chapter 2: Sonos Controller for iPad

Creating a Stereo Pair

The Stereo Pair setting allows you to group two PLAY:5s or two PLAY:3s in the same room to create a wider stereo experience.
In this configuration, one component serves as the left channel and the other serves as the right channel.
Optimum placement information
• When creating a stereo pair, it is best to place the two PLAY:5 or PLAY:3 units 8 to 10 feet away from each other, angled
inward to form a triangle with your favorite listening position.
• Your favorite listening position should be 8 to 12 feet from the units. Less distance increases bass, more distance im-
proves stereo imaging.
Note: The Stereo Pair setting is for use with PLAY:3s and PLAY:5s only. You can pair two
PLAY:3s or two PLAY:5s. You cannot pair a PLAY:3 with a PLAY:5.
From the Settings menu, touch ZonePlayer Settings.
1.
Touch one of the components you wish to create a stereo pair with.
2.
Touch Create Stereo Pair, and touch Next.
3.
Select the other component you wish to pair, and then touch Next.
4.
2-11