JOUTEC Teye ADR3311 User Manual page 15

Installati on of rear sensor
The rear sensor cable is att ached with the rear camera and this cable can be connected
with television, navigator, GPS monitor and small monitor to show the live view from rear
side. (The rear sensor cable should be connected with rear lamp power terminal)
1
Open the trunk(boot)
of the vehicle and open
the rear lamp like the
picture.
3 Pill out the (+) power
wire of rear lamp like
picture.
Cauti on!
Each vehicle has its own and diff erent structure and system.
The vehicle should be turned off while working and conduct with the mechanics.
Please Make sure to be connected fi rmly between T-box and the rear camera.
Installing the accessories
1 Locate the best positi on for the
remote alarm butt on. Secure
the butt on by removing the
adhesive fi lm att ached to the
tape on the external butt on,
press and hold.
Connect the video cable to
3
the connecti on port of the
device.
2
Take a look at the rear
lamp and check (+) power
wire and (-)
power wire
4 Connect rear sensor cable
to pilled (+) power wire
and wrap up by vinyl
electrical tape.
2
Locate the best positi on
for Remote control IR
recepti on.
4
Keep the remote control
at the safe place to be
reached easily. .
15