Operati On Sequence; Preparati On For Video Recording; Conti Nuous Recording While Driving; Running The Viewer Program Aft Er Driving - JOUTEC Teye ADR3311 User Manual

Operati on sequence

Preparati on for video recording

1.
Check to see whether the SD memory card has been inserted in to the device. and connect
the power cable.
2.
If the device is connected to power, [HELLO] appears on the LCD display, indicati ng that the
video recorder is initi alizing.
3.
Aft er a few seconds, a chime sound will occur and the conti nuous recording will be
conducted while driving the vehicle.

Conti nuous recording while driving

1.
Drive Recorder informs you of your vehicle's speed, when stopped, the unit it displays the ti me.
2.
When the capacity of the SD card has been reached, the oldest fi les are over writt en for
conti nuous recording. The data recorded by either the unit's internal G-Sensor or external
manual record butt on are not over writt en.
SD card inserted in the computer, erasing event data in the DATA folder.)
3.
When you stop the engine or remove the power cable from the cigarett e lighter plug, the
device stops recording.

Running the viewer program aft er driving

1.
The player is built in the SD card so the user is able to view the recorded data on any PC.
2.
Check the recorded SD card data regularly for stable operati on of the device and the SD card.
3.
Always back up all important data in a diff erent storage media.
(Hard disk drive, CD, portable disk drive, etc)
4.
The newly released fi rmware will be available to download at the website.
10
(This alarm data must be erased by the User with the