Alternative Frequencies; Except Sony Cd/6Cd Generation - Ford Audio System Owner's Handbook Manual

Regional mode OFF: This allows a
larger coverage area if neighbouring
regional networks are carrying the
same programming, but can cause
'random' AF switches if they are not.
Sony CD/6CD Generation 2
• Press the menu button briefly.
• Use the up or down arrow
buttons until 'REGIONAL' is
displayed.
• Use the left or right arrow buttons
to turn the function on or off.
Except Sony CD/6CD
Generation 2
• Press and hold the menu button
until the display changes.
• Repeatedly press the menu
button until 'REG' is displayed.
• Use the arrow buttons to turn the
function on or off.
ALTERNATIVE
FREQUENCIES
Many programmes broadcast on the
FM waveband have a programme
identification (PI) code, which can be
recognised by audio units.
If your radio has AF tuning switched
on and you move from one
transmission area to another, this
facility will search for and switch to a
stronger station signal, if one can be
found.
Audio unit menus
20
Under certain conditions, however,
alternative frequency tuning may
temporarily disrupt normal reception.
With AF-ON' or AF-AUTO' selected,
the unit continually evaluates signal
strength and, if a better signal
becomes available, the unit will switch
to that alternative. It mutes while it
checks a list of alternative
frequencies and, if necessary, it will
search once across the selected
waveband for a genuine alternative
frequency.
It will restore radio reception when it
finds one or, if one is not found, the
unit will return to the original stored
frequency. On certain units, Not
Found' will be displayed.
With AF-MAN' selected, the unit
operates in a similar way to
AF-AUTO' or AF-ON', but only
searches for an alternative frequency
when prompted by pressing a preset
button.
With AF-OFF' selected, the original
stored frequency remains selected.
In this mode, AF-OFF' will be
displayed every time the unit is turned
on.
Sony CD/6CD
• Press the MENU button and use
the up or down arrow button to
select an AF' display.
• Use the left or right arrow button
to select the setting required.
• Press the MENU button to confirm
your selection.